Hunter popups are made of tough ABS. The same material as sewer pipes.

I discuss this product here on my YouTube channel.

Hunter popups are made of tough ABS. The same material as sewer pipes.

I discuss this product here on my YouTube channel.

Hunter popups are made of tough ABS. The same material as sewer pipes. .

I discuss this product here on my YouTube channel.

This model has a 30 PSI pressure regulator and check valve built in. .

I discuss popups here on my YouTube channel.

This model has a 30 PSI pressure regulator and check valve built in. .

I discuss popups here on my YouTube channel.

This model has a 30 PSI pressure regulator built-in.

I discuss popups here on my YouTube channel.

This model has a 40 PSI pressure regulator and check valve built in.

I discuss popups here on my YouTube channel.

This model has a 40 PSI pressure regulator built in.

I discuss popups here on my YouTube channel.

This model has a 40 PSI pressure regulator and check valve built in.

I discuss popups here on my YouTube channel.

When you no longer need your Hunter Pro-Spray popups but you don’t want to dig them up to remove them, this is your answer. Simply unscrew the popup bonnet then remove it and the guts and screw this cap on. THIS ONLY WORKS WITH HUNTER popups.

When you no longer need your popups but you don’t want to dig them up to remove them, this is your answer. Simply unscrew the popup nozzle then screw this blank nozzle on. Popup not included. THIS FITS ANY FEMALE THREAD NOZZLES (example: Hunter, Rain Bird, Orbit, Irritrol, Richdel).

These spray 6 to 12 ft @ 40 PSI

This sprays 8 to 15 ft @ 40 PSI

This sprays 13 to 21 ft @ 40 PSI

These spray 22 to 30 ft @ 40 PSI

These spray 22 to 30 ft @ 40 PSI

These spray a 5 x 30 ft rectangle @ 40 PSI (15ft to the left and right of the nozzle)

The adapter will work with male and female nozzles.

This rotor spray is intended to be installed on a schedule 80 riser above grade. It comes with a 2.0 nozzle which sprays UP TO 25ft under perfect conditions . If you need a different nozzle consider ordering a nozzle tree since I’m not positive they send a tree with it. Remember to order the adjustment tool as well if you don’t already have one.

This is a popup rotor spray is intended to be installed below grade. It comes with a 2.0 nozzle which sprays UP TO 25ft under perfect conditions . If you need a different nozzle consider ordering a nozzle tree since I’m not positive they send a tree with it. Remember to order the adjustment tool as well if you don’t already have one.

This is a popup rotor spray and is intended to be installed below grade. It comes with a 2.0 nozzle which sprays UP TO 25ft under perfect conditions . If you need a different nozzle consider ordering a nozzle tree since I’m not positive they send a tree with it. Remember to order the adjustment tool as well if you don’t already have one.

This is a popup rotor spray and is intended to be installed below grade. It includes a check valve. It comes with a 2.0 nozzle which sprays UP TO 25ft under perfect conditions . If you need a different nozzle consider ordering a nozzle tree since I’m not positive they send a tree with it. Remember to order the adjustment tool as well if you don’t already have one.

This adjustment tool will work on ALL Hunter rotor spray models AND the PS-04 popups. You can use the metal end to pop out PGJ nozzles when changing them out AFTER the allen screw has been backed out enough.

This tool will work on ALL Hunter PGP and I-20 rotor spray models. Use it to hold up the shaft while you change the nozzle.

This nozzle tree is only for the PGP Ultra and I-20. It is not for the older PGP models that have round nozzles. The gray nozzles are for low trajectory sprays.

This nozzle tree is only for the PGP Ultra and I-20. It is not for the older PGP models that have round nozzles. These nozzles spray 18 to 25ft @50 PSI in perfect conditions.

This is a popup rotor spray and is intended to be installed below grade. It’s supposed to include a nozzle tree and an adjustment tool.

This pressure gauge is specifically for rotor sprays of any brand or model. The recommended practice is to check PSI at the furthest head from the sprinkler valve. Each model performs best at a specific pressure. PGJ’s at 40 PSI. PGP’s at 50 PSI.

This is a popup rotor spray and is intended to be installed below grade. It’s supposed to include a nozzle tree and an adjustment tool. It has a check built-in.