This is the 4-station model of Hunter’s most versatile flagship controller. It can be easily operated at the controller or with the quick addition of the WAND WiFi module it can be controlled by smartphone or computer or tablet from anywhere. It has a backlit display and can accept a mulitude of add-ons such as sensors and remote control units.

This is the 6-station model of Hunter’s most versatile flagship controller. It can be easily operated at the controller or with the quick addition of the WAND WiFi module it can be controlled by smartphone or computer or tablet from anywhere. It has a backlit display and can accept a mulitude of add-ons such as sensors and remote control units.

This is the 8-station model of Hunter’s most versatile flagship controller. It can be easily operated at the controller or with the quick addition of the WAND WiFi module it can be controlled by smartphone or computer or tablet from anywhere. It has a backlit display and can accept a mulitude of add-ons such as sensors and remote control units.

This is the 14-station model of Hunter’s most versatile flagship controller. It can be easily operated at the controller or with the quick addition of the WAND WiFi module it can be controlled by smartphone or computer or tablet from anywhere. It has a backlit display and can accept a mulitude of add-ons such as sensors and remote control units.

This comes with a 4-station starter module but can be upgraded up to 23 stations. Choose from 3-station, 9-station, and 16-station modules to fit your needs. If you use a 2-wire decoder system then you can increase the capacity to 32 stations.

This module is backwards compatible with ALL Pro-C timers.

This module is backwards compatible with ALL Pro-C timers.

This remote control kit includes a receiver (not shown) and has a stated short range of 1000 ft. 

This kit includes a ROAM wire harness (Smart Port), 4 AAA batteries, and a tough carry case. This remote has a stated range of 2 miles under optimal conditions and fully charged batteries.

This panel upgrades the Pro-C interface to make it WiFi capable. With this upgrade you have the full function of the Hydrawise software and remote capability with your computer, smartphone, and tablet from anywhere there is WiFi available. This also makes it compatible with the HC Flow meter available on this page. NOTE: This is only compatible with Pro-C timers manufactured after March 2014. The computer ribbon must have 2 rows of pins.

This is the 6-station model of Hunter’s pro-grade Hydrawise controller. It can be easily operated at the controller or by smartphone, computer, or tablet from anywhere. It has a backlit display and can accept a mulitude of add-ons such as sensors like the HC Flow Meter below.

This is the 12-station model of Hunter’s Hydrawise controller. It can be easily operated at the controller or by smartphone, computer, or tablet from anywhere. It has a backlit display and can accept a mulitude of add-ons such as sensors like the HC Flow Meter below.

This is the 1-station model of the best battery-powered controller for irrigation valves and you can operate it from your smartphone via Bluetooth. This particular model does not have a DC solenoid included. You can connect certain sensors and a solar unit to this. See the video at the top of this page.

This is the 1-station model of the best battery-powered controller for irrigation valves and you can operate it from your smartphone via Bluetooth. This particular model DOES have a DC solenoid included. You can connect certain sensors and a solar unit to this. See the video at the top of this page.

This is the 2-station model of the best battery-powered controller for irrigation valves and you can operate it from your smartphone via Bluetooth. This particular model does not have a DC solenoid included. You can connect certain sensors and a solar unit to this. See the video at the top of this page.

This is the 1-station model of the best battery-powered controller for irrigation valves. This particular model DOES have a DC solenoid included. You can connect certain sensors and a solar unit to this. See the video at the top of this page.

This is the 2-station model of the best battery-powered controller for irrigation valves. This particular model doesn’t have a DC solenoid included. You can connect certain sensors and a solar unit to this. See the video at the top of this page.

This is the 4-station model of the best battery-powered controller for irrigation valves. This particular model doesn’t have a DC solenoid included. You can connect certain sensors and a solar unit to this. See the video at the top of this page.

This solenoid works on any Hunter sprinkler valve connected to a battery-operated controller. If your controller is operated by AC then you need the AC solenoid.

Be sure to use watertite wire nuts.

This solenoid works on any Irritrol, Toro, Lawn Genie, or Lawn Jet sprinkler valve connected to a battery-operated controller. If your controller is operated by AC then you need the AC solenoid.

Be sure to use watertite wire nuts.

This solenoid works on Rain Bird sprinkler valves connected to a battery-operated controller. If your controller is operated by AC then you need the AC solenoid.

Be sure to use watertite wire nuts.

This 6-station model is the simplest battery-powered controller on the market. Pair it with the SPXCH Solar Panel Kit and you’ll never need to replace batteries again. Use this controller where getting AC power is difficult or cost prohibitive.

This 12-station model is the simplest battery-operated controller on the market. Pair it with the SPXCH Solar Panel Kit and you’ll never need to replace batteries again. Use this controller where getting AC power is difficult or cost prohibitive.

This is the Solar Panel Kit for the XCH Hybrid controller. It includes a battery pack to install inside the controller.

This simple rain sensor connects to your Hunter timer’s sensor terminals and shuts off the timer when it’s raining. The sensitivity is adjustable and can be bypassed.

This is the model to be used with the NODE controllers.

This wireless rain sensor connects to your Hunter timer’s sensor terminals and shuts off the timer when it’s raining or freezing. The sensitivity is adjustable and can be bypassed.

This mini weather station connects to your Hunter timer’s sensor terminals. It includes 40 ft. of wire and adjusts the run times based on the weather. It also shuts off the timer when it’s raining or freezing. The sensitivity is adjustable and can be bypassed.

This is the REPLACEMENT transmitter for the Wireless Rain/Freeze sensor kit. The transmitter has an unreplaceable lithium battery built-in that only lasts about 10 yrs.

This adjustable wind sensor will turn off your irrigation system when the wind exceeds a user-defined velocity. This can be installed with AC timers and NODE controllers.

This solar panel kit eliminates the need for annual alkaline battery replacements. The kit includes a battery pack for the standard NODE battery-powered controllers only. Not compatible with the Bluetooth NODEs.

This 1 tap faucet timer is controlled via the free Hunter BTT Bluetooth app on your smartphone. You can control as many of these units as needed with one app.

This 2 tap faucet timer is controlled via the free Hunter BTT Bluetooth app on your smartphone. You can control as many of these units as needed with one app.

This is the Hydrawise compatible 3/4″ HC Flow Meter that talks with the Hydrawise controllers on this page. Be sure to read the installation documentation and video before purchasing it to be sure you can satisfy the necessary parameters. Click the HC meter button below to go to the HC Flow Meter page. The Wireless HC Flow meter kit is not available on Amazon at this time. Check elsewhere including a professional irrigation distributor.

This is the Hydrawise compatible 1″ HC Flow Meter that talks with the Hydrawise controllers on this page. Be sure to read the installation documentation and video before purchasing it to be sure you can satisfy the necessary parameters. Click the HC meter button below to go to the HC Flow Meter page. The Wireless HC Flow meter kit is not available on Amazon at this time. Check elsewhere including a professional irrigation distributor.

This is the Hydrawise compatible 1-1/2″ HC Flow Meter that talks with the Hydrawise controllers on this page. Be sure to read the installation documentation and video before purchasing it to be sure you can satisfy the necessary parameters. Click the HC meter button below to go to the HC Flow Meter page. The Wireless HC Flow meter kit is not available on Amazon at this time. Check elsewhere including a professional irrigation distributor.

This is the 6-station model and includes a tough, lockable yet removable waterproof door. This controller can accept many add-ons including a handy remote control unit shown on this page. See the controller video on this page for more details.

This is the 6-station model and includes a tough, lockable yet removable waterproof door. This controller can accept many add-ons including a handy remote control unit shown on this page. See the controller video on this page for more details.

This is the 9-station model and includes a tough, lockable yet removable waterproof door. This controller can accept many add-ons including a handy remote control unit shown on this page. See the controller video on this page for more details.

This is the 9-station model and includes a tough, lockable yet removable waterproof door. This controller can accept many add-ons including a handy remote control unit shown on this page. See the controller video on this page for more details.

This is Irritrol’s most cost effective remote control kit. The receiver simply plugs into the controller’s smart port and you’re good to go. No programming needed though customizing the transmitter is available. It has a great range. This kit will work with any Irritrol controller with a blue interface.  IMPORTANT: don’t let the transmitter get wet except with a barely damp cloth for cleaning. It’s not waterproof.

This mini weather station is compatible with all Irritrol controllers with the blue interface. It will adjust the run times according to the weather and will shut off the system when it begins raining or is at freezing temps.

Climate Logic firmware update (ver. 2.18) now available for FREE: https://irrigationsystemexpert.net

Purchase the SD card on the right to install the firmware onto.

This SD card has more than enough space on it for the Climate Logic firmware.

This is the TC-6-IN-R model. It is intended for indoors. This controller can accept many add-ons including a handy remote control unit shown on this page. See the controller video on this page for more details.

This is the TC-6-EX-R model. It includes a tough, lockable waterproof door. It can be installed indoors or out. This controller can accept many add-ons including a handy remote control unit shown on this page. See the controller video on this page for more details.

This is the TC-9-IN-R model. It is intended to be installed indoors. This controller can accept many add-ons including a handy remote control unit shown on this page. See the controller video on this page for more details.

This is the TC–9-EX-R model. It includes a tough, lockable waterproof door. It can be installed indoors or out. This controller can accept many add-ons including a handy remote control unit shown on this page. See the controller video on this page for more details.

This is the TC-12-EX-R model. It includes a tough, lockable waterproof door. It can be installed indoors or out. This controller can accept many add-ons including a handy remote control unit shown on this page. See the controller video on this page for more details.

This is the TC-15-EX-R model. It includes a tough, lockable waterproof door. It can be installed indoors or out. This controller can accept many add-ons including a handy remote control unit shown on this page. See the controller video on this page for more details.

This is the TC-18-EX-R model. It includes a tough, lockable waterproof door. It can be installed indoors or out. This controller can accept many add-ons including a handy remote control unit shown on this page. See the controller video on this page for more details.

This is the TC-18-MOD-R model. It is only the interface panel. It can be installed in indoor or outdoor models. 

This timer screws onto any outdoor faucet and is super easy to operate. Be sure to remove it and store indoors during the winter if your area has hard freezes.

This timer screws onto any outdoor faucet and is super easy to operate. This is the premium version which has more versatile programming options. Click the button to see more details. Be sure to remove it and store indoors during the winter if your area has hard freezes.

This timer screws onto any outdoor faucet and is super easy to operate. Be sure to remove it and store indoors during the winter if your area has hard freezes.

This timer screws onto any outdoor faucet and is super easy to operate. It’s designed to operate 2 garden hoses or drip tubing lines automatically. Be sure to remove it and store indoors during the winter if your area has hard freezes.

This handy device can be easily installed in minutes on most water meters. It includes a smartphone app that generates on demand reports so you can track your water usage. It will alert you if there is an anomaly like a sprinkler valve stuck on.